Compilation of bitmonero on Arch with gcc 6.1 results in the following
error:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp: In member function ‘virtual void TestDB::set_hard_fork_version(uint64_t, uint8_t)’:
/home/mwo/bitmonero/tests/unit_tests/hardfork.cpp:132:5: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
if (versions.size() <= height) versions.resize(height+1); versions[height] = version;
This can be fixed by simply unfolding this line into three lines.
The tests for rejection of unmixable outputs in v2 are commented out,
as there are no unmixable outputs created anymore. This should be
restored at some point.
This is a list of existing output amounts along with the number
of outputs of that amount in the blockchain.
The daemon command takes:
- no parameters: all outputs with at least 3 instances
- one parameter: all outputs with at least that many instances
- two parameters: all outputs within that many instances
The default starts at 3 to avoid massive spamming of all dust
outputs in the blockchain, and is the current minimum mixin
requirement.
An optional vector of amounts may be passed, to request
histogram only for those outputs.
We also replace the --fakechain option with an optional structure
containing details about configuration for the core/blockchain,
for test purposes. This seems more future friendly.
7658ac0 blockchain: revert handle_get_objects adding block id on tx not found (moneromooo-monero)
3a0f4d8 berkeleydb: fix delete/free mismatch (moneromooo-monero)
1642be2 minor bugfixes and refactoring (Thomas Winget)
098dcf2 unit_tests: fix mnemonics unit test testing invalid seeds (moneromooo-monero)
119eb10 unit_tests: fix hard fork unit tests and add a test for major too (moneromooo-monero)
64a2aa3 hardfork: allow passing chain height in get(height) for convenience (moneromooo-monero)
Some word triplets, such as "mugged names nail", are not valid
results from any 32 bit value. If used to decode a 32 bit value,
the result will therefore encode to a different word triplet.
Fix this by using random words converted from an actual random
bitstring, ensuring we always get valid triplets.
Some tests assume the first output in a transaction goes to the recipient.
However, it can be the change. When it is, the recipient's keys will not
recognize this output. To fix this, we send all we have, to ensure there
is no change, and the first output goes to the recipient.
I'm not sure why this worked with Cryptonote. The tests sent 17 coins,
which seems way smaller than the first Bytecoin block reward, so there
would have been change too. Maybe outputs were not shuffled originally.
Block reward may now be less than the full amount allowed.
This was breaking the bitflipping test.
We now keep track of whether a block which was accepted by the core
has a lower than allowed block reward, and allow this in the test.
They were trying to send too much monero, and thus failing.
The parameters were set in such a way that the (simple) output
gathering code could fulfill them for 4 block rewards for the
original Bytecoin emission, but that does not work with monero
so we need to use smaller values.
The current monero consensus uses 0.01 per kB fees, so use enough
for 2 kB transactions for now. It'll probably have to be either
bumped further or changed to calculate the proper fee.
The core tests use the blockchain, and reset it to be able
to add test data to it. This does not play nice with the
databases, since those will save that data without an explicit
save call.
We add a fakechain flag that the tests will set, which tells
the core and blockchain code to use a separate database, as
well as skip a few things like checkpoints and fixup, which
only make sense for real data.
Also add some more tests, and rename some instances of
"version" and "add" for clarity.
NOTE: the starting height values are sometimes wrong.
I suspect this is due to the hard fork reorg code being
buggy, since they're good when syncing after the fact.
However, they're not actually used by the consensus code,
so I'm ignoring this for now, but this needs debugging.
The last relayed time of a transaction is maintained, and
transactions will be relayed again if they are still in the
pool after a certain amount of time, which increases with
the transaction's age. All such transactions are resent,
whether or not they originated on the local node.
baf101e More changes for 2-min blocks Use the correct block time for realtime fuzz on locktime Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting) Lock unit tests to original block time for now (Javier Smooth)
4fea1a5 Adjust difficulty target (2 min) and full reward zone (60 kbytes) for block version 2 (Javier Smooth)
Use the correct block time for realtime fuzz on locktime
Use the correct block time to calculate next_difficulty on alt chains (will not work as-is with voting)
Lock unit tests to original block time for now
Using major version would cause older daemons to reject those
blocks as they fail to deserialize blocks with a major version
which is not 1. There is no such restriction on the minor
version, so switching allows older daemons to coexist with
newer ones till the actual fork date, when most will hopefully
have updated already.
Also, for the same reason, we consider a vote for 0 to be a
vote for 1, since older daemons set minor version to 0.
This allows knowing the hard fork a block must obey in order to be
added to the blockchain. The previous semantics would use that new
block's version vote to determine this hard fork, which made it
impossible to use the rules to validate transactions entering the
tx pool (and made it impossible to validate a block before adding
it to the blockchain).
This ensures one can't instanciate a DNSResolver object by
mistake, but uses the singleton. A separate create static
function is added for cases where a new object is explicitely
needed.
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
Based on tewinget's update.
Make OpenAlias address format independent of existing DNS functions.
Add tests.
Test:
make debug-test
cd build/debug/tests/unit_tests
# test that regular DNS functions work, including IPv4 lookups.
# also test function that converts OpenAlias address format
make && ./unit_tests --gtest_filter=DNSResolver*
# test that OpenAlias addresses like donate@getmonero.org work from
# wallet tools
make && ./unit_tests --gtest_filter=AddressFromURL.Success
DNSSEC is now implemented with the hardcoded key from unbound.
This will need to be not hardcoded in the future, but is okay for now.
Unit tests updated for DNSSEC (as well as for the fact that, contrary to
previous assumption, example.com does not have a static IP address).
51e3579 Fixed bug in static linking boost on MINGW (Thomas Winget)
f78bb00 Hopefully fixes build on Windows for real this time (Thomas Winget)
2b0583b Hopefully fixes build on Windows (Thomas Winget)
9dab105 DNS checkpoint loading for testnet should now be correct (Thomas Winget)
52f9629 sending commands to forked daemon works on testnet now (Thomas Winget)
76289d0 Fix tests building -- function signatures changed (Thomas Winget)
db53e19 revert stop_daemon method to use correct exit (Thomas Winget)
96cbecf RPC calls for background daemon added in (Thomas Winget)
9193d6f Daemonize changes pulled in -- daemon builds (Thomas Winget)
Everything except actually *using* BlockchainBDB is wired up, but the db
itself is not yet working. Some error about user mem not large enough.
I think I know what this error means, but I can't determine the cause.
Notes: BerkeleyDB does not allow 0-indexing in its recno type databases,
so block numbers *in the database* will be 1-indexed. Modifications
to indexing have been made as needed.
+toc -doc -drmonero
Fixed the windows path, and improved logging and data
(for graph) logging, fixed some locks and added more checks.
Still there is a locking error,
not added by my patches, but present in master version
(locking of map/list of peers).
commands and options for network limiting
works very well e.g. for 50 KiB/sec up and down
ToS (QoS) flag
peer number limit
TODO some spikes in ingress/download
TODO problems when other up and down limit
added "otshell utils" - simple logging (with colors, text files channels)
Some BlockchainDB unit testing fleshed out (and working), rudimentary
linker flag for lmdb in CMakeLists, but should probably be done
"correctly" at some point (find it on whatever system you're building on
and all that jazz).
update for rebase (warptangent 2015-01-04)
fix conflicts with upstream CMakeLists.txt files
tests/CMakeLists.txt (remove edits from original commit)
b94b8cd Added unit test. Fails for Japanese for some reason. (Oran Juice)
4c8a628 Remove iostream header put in during testing (Oran Juice)
9875f5b Variable unique prefix lengths for seed (Oran Juice)
Note: DNSResolver does not yet *use* DNSSEC, but rather this commit is
preparation for including DNSSEC validation. The function in
src/wallet/wallet2.cpp that uses DNSResolver still needs its parameters
updated accordingly.
CMake config file written, but was unable to test/get it working
properly because of a bug in CMake with functions related to
find_package. Simple "-lunbound" flag used in its stead for now. May
not build on non-Linux systems, not sure yet.
moneromooo-monero
Riccardo Spagni
anonimal
Ilya Kitaev
moneroexample
Howard Chu
Javier Smooth
warptangent
me0wmix
Rostislav
NoodleDoodleNoodleDoodleNoodleDoodleNoo
warptangent
rfree2monero
Thomas Winget
Ben Boeckel
Oran Juice
Zachary Michaels
Neozaru
mydesktop
Antonio Juarez