|
|
|
|
// Copyright (c) 2006-2013, Andrey N. Sabelnikov, www.sabelnikov.net
|
|
|
|
|
// All rights reserved.
|
|
|
|
|
//
|
|
|
|
|
// Redistribution and use in source and binary forms, with or without
|
|
|
|
|
// modification, are permitted provided that the following conditions are met:
|
|
|
|
|
// * Redistributions of source code must retain the above copyright
|
|
|
|
|
// notice, this list of conditions and the following disclaimer.
|
|
|
|
|
// * Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
// documentation and/or other materials provided with the distribution.
|
|
|
|
|
// * Neither the name of the Andrey N. Sabelnikov nor the
|
|
|
|
|
// names of its contributors may be used to endorse or promote products
|
|
|
|
|
// derived from this software without specific prior written permission.
|
|
|
|
|
//
|
|
|
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
|
|
|
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
|
|
|
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
|
|
|
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER BE LIABLE FOR ANY
|
|
|
|
|
// DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
|
|
|
// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
|
|
|
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
|
|
|
// ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
|
|
|
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
//
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef _MISC_LOG_EX_H_
|
|
|
|
|
#define _MISC_LOG_EX_H_
|
|
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
|
|
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
#include <string>
|
|
|
|
|
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
#include "easylogging++.h"
|
|
|
|
|
|
|
|
|
|
#undef MONERO_DEFAULT_LOG_CATEGORY
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
#define MONERO_DEFAULT_LOG_CATEGORY "default"
|
|
|
|
|
|
|
|
|
|
#define MAX_LOG_FILE_SIZE 104850000 // 100 MB - 7600 bytes
|
|
|
|
|
#define MAX_LOG_FILES 50
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
|
|
|
|
|
#define MCLOG_TYPE(level, cat, color, type, x) do { \
|
|
|
|
|
if (ELPP->vRegistry()->allowed(level, cat)) { \
|
|
|
|
|
el::base::Writer(level, color, __FILE__, __LINE__, ELPP_FUNC, type).construct(cat) << x; \
|
|
|
|
|
} \
|
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
|
|
#define MCLOG(level, cat, color, x) MCLOG_TYPE(level, cat, color, el::base::DispatchAction::NormalLog, x)
|
|
|
|
|
#define MCLOG_FILE(level, cat, x) MCLOG_TYPE(level, cat, el::Color::Default, el::base::DispatchAction::FileOnlyLog, x)
|
|
|
|
|
|
|
|
|
|
#define MCFATAL(cat,x) MCLOG(el::Level::Fatal,cat, el::Color::Default, x)
|
|
|
|
|
#define MCERROR(cat,x) MCLOG(el::Level::Error,cat, el::Color::Default, x)
|
|
|
|
|
#define MCWARNING(cat,x) MCLOG(el::Level::Warning,cat, el::Color::Default, x)
|
|
|
|
|
#define MCINFO(cat,x) MCLOG(el::Level::Info,cat, el::Color::Default, x)
|
|
|
|
|
#define MCDEBUG(cat,x) MCLOG(el::Level::Debug,cat, el::Color::Default, x)
|
|
|
|
|
#define MCTRACE(cat,x) MCLOG(el::Level::Trace,cat, el::Color::Default, x)
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
|
|
|
|
|
#define MCLOG_COLOR(level,cat,color,x) MCLOG(level,cat,color,x)
|
|
|
|
|
#define MCLOG_RED(level,cat,x) MCLOG_COLOR(level,cat,el::Color::Red,x)
|
|
|
|
|
#define MCLOG_GREEN(level,cat,x) MCLOG_COLOR(level,cat,el::Color::Green,x)
|
|
|
|
|
#define MCLOG_YELLOW(level,cat,x) MCLOG_COLOR(level,cat,el::Color::Yellow,x)
|
|
|
|
|
#define MCLOG_BLUE(level,cat,x) MCLOG_COLOR(level,cat,el::Color::Blue,x)
|
|
|
|
|
#define MCLOG_MAGENTA(level,cat,x) MCLOG_COLOR(level,cat,el::Color::Magenta,x)
|
|
|
|
|
#define MCLOG_CYAN(level,cat,x) MCLOG_COLOR(level,cat,el::Color::Cyan,x)
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
|
|
|
|
|
#define MLOG_RED(level,x) MCLOG_RED(level,MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MLOG_GREEN(level,x) MCLOG_GREEN(level,MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MLOG_YELLOW(level,x) MCLOG_YELLOW(level,MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MLOG_BLUE(level,x) MCLOG_BLUE(level,MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MLOG_MAGENTA(level,x) MCLOG_MAGENTA(level,MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MLOG_CYAN(level,x) MCLOG_CYAN(level,MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
|
|
|
|
|
#define MFATAL(x) MCFATAL(MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MERROR(x) MCERROR(MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MWARNING(x) MCWARNING(MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MINFO(x) MCINFO(MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MDEBUG(x) MCDEBUG(MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MTRACE(x) MCTRACE(MONERO_DEFAULT_LOG_CATEGORY,x)
|
|
|
|
|
#define MLOG(level,x) MCLOG(level,MONERO_DEFAULT_LOG_CATEGORY,el::Color::Default,x)
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
|
|
|
|
|
#define MGINFO(x) MCINFO("global",x)
|
|
|
|
|
#define MGINFO_RED(x) MCLOG_RED(el::Level::Info, "global",x)
|
|
|
|
|
#define MGINFO_GREEN(x) MCLOG_GREEN(el::Level::Info, "global",x)
|
|
|
|
|
#define MGINFO_YELLOW(x) MCLOG_YELLOW(el::Level::Info, "global",x)
|
|
|
|
|
#define MGINFO_BLUE(x) MCLOG_BLUE(el::Level::Info, "global",x)
|
|
|
|
|
#define MGINFO_MAGENTA(x) MCLOG_MAGENTA(el::Level::Info, "global",x)
|
|
|
|
|
#define MGINFO_CYAN(x) MCLOG_CYAN(el::Level::Info, "global",x)
|
|
|
|
|
|
|
|
|
|
#define IFLOG(level, cat, color, type, init, x) \
|
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
6 years ago
|
|
|
do { \
|
|
|
|
|
if (ELPP->vRegistry()->allowed(level, cat)) { \
|
|
|
|
|
init; \
|
|
|
|
|
el::base::Writer(level, color, __FILE__, __LINE__, ELPP_FUNC, type).construct(cat) << x; \
|
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
6 years ago
|
|
|
} \
|
|
|
|
|
} while(0)
|
|
|
|
|
#define MIDEBUG(init, x) IFLOG(el::Level::Debug, MONERO_DEFAULT_LOG_CATEGORY, el::Color::Default, el::base::DispatchAction::NormalLog, init, x)
|
Pruning
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
6 years ago
|
|
|
|
|
|
|
|
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
#define LOG_ERROR(x) MERROR(x)
|
|
|
|
|
#define LOG_PRINT_L0(x) MWARNING(x)
|
|
|
|
|
#define LOG_PRINT_L1(x) MINFO(x)
|
|
|
|
|
#define LOG_PRINT_L2(x) MDEBUG(x)
|
|
|
|
|
#define LOG_PRINT_L3(x) MTRACE(x)
|
|
|
|
|
#define LOG_PRINT_L4(x) MTRACE(x)
|
|
|
|
|
|
|
|
|
|
#define _dbg3(x) MTRACE(x)
|
|
|
|
|
#define _dbg2(x) MDEBUG(x)
|
|
|
|
|
#define _dbg1(x) MDEBUG(x)
|
|
|
|
|
#define _info(x) MINFO(x)
|
|
|
|
|
#define _note(x) MDEBUG(x)
|
|
|
|
|
#define _fact(x) MDEBUG(x)
|
|
|
|
|
#define _mark(x) MDEBUG(x)
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
#define _warn(x) MWARNING(x)
|
|
|
|
|
#define _erro(x) MERROR(x)
|
|
|
|
|
|
|
|
|
|
#define MLOG_SET_THREAD_NAME(x) el::Helpers::setThreadName(x)
|
|
|
|
|
|
|
|
|
|
#ifndef LOCAL_ASSERT
|
|
|
|
|
#include <assert.h>
|
|
|
|
|
#if (defined _MSC_VER)
|
|
|
|
|
#define LOCAL_ASSERT(expr) {if(epee::debug::get_set_enable_assert()){_ASSERTE(expr);}}
|
|
|
|
|
#else
|
|
|
|
|
#define LOCAL_ASSERT(expr)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
std::string mlog_get_default_log_path(const char *default_filename);
|
|
|
|
|
void mlog_configure(const std::string &filename_base, bool console, const std::size_t max_log_file_size = MAX_LOG_FILE_SIZE, const std::size_t max_log_files = MAX_LOG_FILES);
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
void mlog_set_categories(const char *categories);
|
|
|
|
|
std::string mlog_get_categories();
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
void mlog_set_log_level(int level);
|
|
|
|
|
void mlog_set_log(const char *log);
|
|
|
|
|
|
|
|
|
|
namespace epee
|
|
|
|
|
{
|
|
|
|
|
namespace debug
|
|
|
|
|
{
|
|
|
|
|
inline bool get_set_enable_assert(bool set = false, bool v = false)
|
|
|
|
|
{
|
|
|
|
|
static bool e = true;
|
|
|
|
|
if(set)
|
|
|
|
|
e = v;
|
|
|
|
|
return e;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define ENDL std::endl
|
|
|
|
|
|
|
|
|
|
#define TRY_ENTRY() try {
|
|
|
|
|
#define CATCH_ENTRY(location, return_val) } \
|
|
|
|
|
catch(const std::exception& ex) \
|
|
|
|
|
{ \
|
|
|
|
|
(void)(ex); \
|
|
|
|
|
LOG_ERROR("Exception at [" << location << "], what=" << ex.what()); \
|
|
|
|
|
return return_val; \
|
|
|
|
|
}\
|
|
|
|
|
catch(...)\
|
|
|
|
|
{\
|
|
|
|
|
LOG_ERROR("Exception at [" << location << "], generic exception \"...\"");\
|
|
|
|
|
return return_val; \
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#define CATCH_ENTRY_L0(lacation, return_val) CATCH_ENTRY(lacation, return_val)
|
|
|
|
|
#define CATCH_ENTRY_L1(lacation, return_val) CATCH_ENTRY(lacation, return_val)
|
|
|
|
|
#define CATCH_ENTRY_L2(lacation, return_val) CATCH_ENTRY(lacation, return_val)
|
|
|
|
|
#define CATCH_ENTRY_L3(lacation, return_val) CATCH_ENTRY(lacation, return_val)
|
|
|
|
|
#define CATCH_ENTRY_L4(lacation, return_val) CATCH_ENTRY(lacation, return_val)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define ASSERT_MES_AND_THROW(message) {LOG_ERROR(message); std::stringstream ss; ss << message; throw std::runtime_error(ss.str());}
|
|
|
|
|
#define CHECK_AND_ASSERT_THROW_MES(expr, message) do {if(!(expr)) ASSERT_MES_AND_THROW(message);} while(0)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef CHECK_AND_ASSERT
|
|
|
|
|
#define CHECK_AND_ASSERT(expr, fail_ret_val) do{if(!(expr)){LOCAL_ASSERT(expr); return fail_ret_val;};}while(0)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef CHECK_AND_ASSERT_MES
|
|
|
|
|
#define CHECK_AND_ASSERT_MES(expr, fail_ret_val, message) do{if(!(expr)) {LOG_ERROR(message); return fail_ret_val;};}while(0)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef CHECK_AND_NO_ASSERT_MES_L
|
|
|
|
|
#define CHECK_AND_NO_ASSERT_MES_L(expr, fail_ret_val, l, message) do{if(!(expr)) {LOG_PRINT_L##l(message); /*LOCAL_ASSERT(expr);*/ return fail_ret_val;};}while(0)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef CHECK_AND_NO_ASSERT_MES
|
|
|
|
|
#define CHECK_AND_NO_ASSERT_MES(expr, fail_ret_val, message) CHECK_AND_NO_ASSERT_MES_L(expr, fail_ret_val, 0, message)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef CHECK_AND_NO_ASSERT_MES_L1
|
|
|
|
|
#define CHECK_AND_NO_ASSERT_MES_L1(expr, fail_ret_val, message) CHECK_AND_NO_ASSERT_MES_L(expr, fail_ret_val, 1, message)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef CHECK_AND_ASSERT_MES_NO_RET
|
|
|
|
|
#define CHECK_AND_ASSERT_MES_NO_RET(expr, message) do{if(!(expr)) {LOG_ERROR(message); return;};}while(0)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#ifndef CHECK_AND_ASSERT_MES2
|
|
|
|
|
#define CHECK_AND_ASSERT_MES2(expr, message) do{if(!(expr)) {LOG_ERROR(message); };}while(0)
|
|
|
|
|
#endif
|
|
|
|
|
|
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
8 years ago
|
|
|
enum console_colors
|
|
|
|
|
{
|
|
|
|
|
console_color_default,
|
|
|
|
|
console_color_white,
|
|
|
|
|
console_color_red,
|
|
|
|
|
console_color_green,
|
|
|
|
|
console_color_blue,
|
|
|
|
|
console_color_cyan,
|
|
|
|
|
console_color_magenta,
|
|
|
|
|
console_color_yellow
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
bool is_stdout_a_tty();
|
|
|
|
|
void set_console_color(int color, bool bright);
|
|
|
|
|
void reset_console_color();
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
extern "C"
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef __GNUC__
|
|
|
|
|
#define ATTRIBUTE_PRINTF __attribute__((format(printf, 2, 3)))
|
|
|
|
|
#else
|
|
|
|
|
#define ATTRIBUTE_PRINTF
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
bool merror(const char *category, const char *format, ...) ATTRIBUTE_PRINTF;
|
|
|
|
|
bool mwarning(const char *category, const char *format, ...) ATTRIBUTE_PRINTF;
|
|
|
|
|
bool minfo(const char *category, const char *format, ...) ATTRIBUTE_PRINTF;
|
|
|
|
|
bool mdebug(const char *category, const char *format, ...) ATTRIBUTE_PRINTF;
|
|
|
|
|
bool mtrace(const char *category, const char *format, ...) ATTRIBUTE_PRINTF;
|
|
|
|
|
|
|
|
|
|
#ifdef __cplusplus
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#endif //_MISC_LOG_EX_H_
|
