The 10 minute one will never trigger for 0 blocks, as it's still
fairly likely to happen even without the actual hash rate changing
much, so we add a 20 minute window, where it will (for 0 blocks)
and a one hour window.
This curbs runaway growth while still allowing substantial
spikes in block weight
Original specification from ArticMine:
here is the scaling proposal
Define: LongTermBlockWeight
Before fork:
LongTermBlockWeight = BlockWeight
At or after fork:
LongTermBlockWeight = min(BlockWeight, 1.4*LongTermEffectiveMedianBlockWeight)
Note: To avoid possible consensus issues over rounding the LongTermBlockWeight for a given block should be calculated to the nearest byte, and stored as a integer in the block itself. The stored LongTermBlockWeight is then used for future calculations of the LongTermEffectiveMedianBlockWeight and not recalculated each time.
Define: LongTermEffectiveMedianBlockWeight
LongTermEffectiveMedianBlockWeight = max(300000, MedianOverPrevious100000Blocks(LongTermBlockWeight))
Change Definition of EffectiveMedianBlockWeight
From (current definition)
EffectiveMedianBlockWeight = max(300000, MedianOverPrevious100Blocks(BlockWeight))
To (proposed definition)
EffectiveMedianBlockWeight = min(max(300000, MedianOverPrevious100Blocks(BlockWeight)), 50*LongTermEffectiveMedianBlockWeight)
Notes:
1) There are no other changes to the existing penalty formula, median calculation, fees etc.
2) There is the requirement to store the LongTermBlockWeight of a block unencrypted in the block itself. This is to avoid possible consensus issues over rounding and also to prevent the calculations from becoming unwieldy as we move away from the fork.
3) When the EffectiveMedianBlockWeight cap is reached it is still possible to mine blocks up to 2x the EffectiveMedianBlockWeight by paying the corresponding penalty.
Note: the long term block weight is stored in the database, but not in the actual block itself,
since it requires recalculating anyway for verification.
This will trigger if a reorg is seen. This may be used to do things
like stop automated withdrawals on large reorgs.
%s is replaced by the height at the split point
%h is replaced by the height of the new chain
%n is replaced by the number of new blocks after the reorg
b6534c40 ringct: remove unused senderPk from ecdhTuple (moneromooo-monero)
7d375981 ringct: the commitment mask is now deterministic (moneromooo-monero)
99d946e6 ringct: encode 8 byte amount, saving 24 bytes per output (moneromooo-monero)
cdc3ccec ringct: save 3 bytes on bulletproof size (moneromooo-monero)
f931e16c add a bulletproof version, new bulletproof type, and rct config (moneromooo-monero)
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
aee7a4e3 wallet_rpc_server: do not use RPC data if the call failed (moneromooo-monero)
1a0733e5 windows_service: fix memory leak (moneromooo-monero)
0dac3c64 unit_tests: do not rethrow a copy of an exception (moneromooo-monero)
5d9915ab cryptonote: fix get_unit for non default settings (moneromooo-monero)
d4f50cb1 remove some unused code (moneromooo-monero)
61163971 a few minor (but easy) performance tweaks (moneromooo-monero)
30023074 tests: slow_memmem now returns size_t (moneromooo-monero)
This avoids the miner erroring out trying to submit blocks
to a core that's already shut down (and avoids pegging
the CPU while we're busy shutting down).
5808530f blockchain: remove unused output_scan_worker parameter (moneromooo-monero)
1426209a blockchain: don't run threads if we have just one function to run (moneromooo-monero)
6f7a5fd4 db_lmdb: slight speedup getting array data from the blockchain (moneromooo-monero)
99fbe100 db_lmdb: save some string copies for readonly db keys/values (moneromooo-monero)
bf31447e tx_pool: speed up take_tx for transactions from blocks (moneromooo-monero)
4f005a77 tx_pool: remove unnecessary get_transaction_hash (moneromooo-monero)
593ef598 perf_timer: call reserve on new timer array (moneromooo-monero)
6ecc99ad core: avoid unnecessary tx/blob conversions (moneromooo-monero)
00cc1a16 unit_tests: notify test special case for the usual weirdo (moneromooo-monero)
To help protect one's privacy from traffic volume analysis
for people using Tor or I2P. This will really fly once we
relay txes on a timer rather than on demand, though.
Off by default for now since it's wasteful and doesn't bring
anything until I2P's in.
149da42 db_lmdb: enable batch transactions by default (stoffu)
34cb6b4 add --regtest and --fixed-difficulty for regression testing (vicsn)
9e1403e update get_info RPC and bump RPC version (vicsn)
207b66e first new functional tests (vicsn)
on_generateblocks RPC call combines functionality from the on_getblocktemplate and on_submitblock RPC calls to allow rapid block creation. Difficulty is set permanently to 1 for regtest.
Makes use of FAKECHAIN network type, but takes hard fork heights from mainchain
Default reserve_size in generate_blocks RPC call is now 1. If it is 0, the following error occurs 'Failed to calculate offset for'.
Queries hard fork heights info of other network types
db55263 threadpool: allow constructing an object, and misc tweaks (moneromooo-monero)
ce173cb core: remove threadpool dependency from header (moneromooo-monero)
3147468 unit_tests: add threadpool unit test (moneromooo-monero)
740da1b core: fix automatic safe db sync mode switching (moneromooo-monero)
e942d34 protocol: do not switch to unsafe sync mode for just a few blocks (moneromooo-monero)
43f5269f Wallets now do not depend on the daemon rpc lib (moneromooo-monero)
bb89ae8b move connection_basic and network_throttle from src/p2p to epee (moneromooo-monero)
4abf25f3 cryptonote_core does not depend on p2p anymore (moneromooo-monero)
0d9c0db9 Do not build against epee_readline if it was not built (Howard Chu)
178014c9 split off readline code into epee_readline (moneromooo-monero)
a9e14a19 link against readline only for monerod and wallet-wallet-{rpc,cli} (moneromooo-monero)
437421ce wallet: move some scoped_message_writer calls from the libs (moneromooo-monero)
e89994e9 wallet: rejig to avoid prompting in wallet2 (moneromooo-monero)
ec5135e5 move input_line from command_line to simplewallet (moneromooo-monero)
082db75f move cryptonote command line options to cryptonote_core (moneromooo-monero)
This patch allows to filter out sensitive information for queries that rely on the pool state, when running in restricted mode.
This filtering is only applied to data sent back to RPC queries. Results of inline commands typed locally in the daemon are not affected.
In practice, when running with `--restricted-rpc`:
* get_transaction_pool will list relayed transactions with the fields "last relayed time" and "received time" set to zero.
* get_transaction_pool will not list transaction that have do_not_relay set to true, and will not list key images that are used only for such transactions
* get_transaction_pool_hashes.bin will not list such transaction
* get_transaction_pool_stats will not count such transactions in any of the aggregated values that are computed
The implementation does not make filtering the default, so developers should be mindful of this if they add new RPC functionality.
Fixes#2590.
It was always returning true, and could not be foreseen to
usefully return errors in the future. This silences CID 162652
as well as saves some checking code in a few places.
0299cb77 Fix various oversights/bugs in ZMQ RPC server code (Thomas Winget)
77986023 json serialization for rpc-relevant monero types (Thomas Winget)
5c1e08fe Refactor some things into more composable (smaller) functions (Thomas Winget)
9ac2ad07 DRY refactoring (Thomas Winget)
It is unused, as it was apparently a future optimization,
and it leaks some information (though since pools publish
thei blocks they find, that amount seems small).
Structured {de-,}serialization methods for (many new) types
which are used for requests or responses in the RPC.
New types include RPC requests and responses, and structs which compose
types within those.
# Conflicts:
# src/cryptonote_core/blockchain.cpp
c867357a cryptonote_protocol: error handling on cleanup_handle_incoming_blocks (moneromooo-monero)
ce901fcb Fix blockchain_import wedge on exception in cleanup_handle_incoming_blocks (moneromooo-monero)
84fa015e core: guard against exceptions in handle_incoming_{block,tx} (moneromooo-monero)
3dd34a49 Cleanup test impact of moving blockchain_db_types() (Howard Chu)
80344740 More DB support cleanup (Howard Chu)
4c7f8ac0 DB cleanup (Howard Chu)
If monerod is started with default sync mode, set it to SAFE after
synchronization completes. Set it back to FAST if synchronization
restarts (e.g. because another peer has a longer blockchain).
If monerod is started with an explicit sync mode, none of this
automation takes effect.
Add get_fork_version and add_ideal_fork_version to core so
cryptonote_protocol does not have to need the Blockchain
class directly, as it's not in its dependencies, and add
those to the fake core classes in tests too.
binaryFate
moneromooo-monero
Riccardo Spagni
Martijn Otto
xiphon
luigi1111
victorsintnicolaas
Thaer Khawaja
stoffu
Dimitris Apostolou
whythat
xmr-eric
xmr-eric
Cifrado
Howard Chu
Thomas Winget
assylias