You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
107 lines
4.1 KiB
107 lines
4.1 KiB
/* This file is part of MXE. See LICENSE.md for licensing information.
|
|
* This is a elementary program calling and testing Hamlib.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <hamlib/rig.h>
|
|
#include <hamlib/riglist.h>
|
|
|
|
int main(int argc, char *argv[]) {
|
|
RIG *my_rig;
|
|
char *rig_file, *info_buf, *mm;
|
|
freq_t freq;
|
|
value_t rawstrength, power, strength;
|
|
float s_meter, rig_raw2val();
|
|
int status, retcode, isz;
|
|
unsigned int mwpower;
|
|
rmode_t mode;
|
|
pbwidth_t width;
|
|
rig_model_t myrig_model;
|
|
char portname[64];
|
|
port_t myport;
|
|
|
|
strncpy(portname, argv[2], 63);
|
|
portname[63] = '\0';
|
|
|
|
if ((strcmp(argv[2], "--help") == 0) || (argc < 2)) {
|
|
printf("use like: ./%s <portname>\n", argv[0]);
|
|
printf("example: ./%s /dev/ttyS0\n", argv[0]);
|
|
return 0;
|
|
}
|
|
|
|
/* Try to detect rig */
|
|
/* may be overridden by backend probe */
|
|
myport.type.rig = RIG_PORT_SERIAL;
|
|
myport.parm.serial.rate = 9600;
|
|
myport.parm.serial.data_bits = 8;
|
|
myport.parm.serial.stop_bits = 1;
|
|
myport.parm.serial.parity = RIG_PARITY_NONE;
|
|
myport.parm.serial.handshake = RIG_HANDSHAKE_NONE;
|
|
strncpy(myport.pathname, portname, FILPATHLEN);
|
|
|
|
rig_load_all_backends();
|
|
myrig_model = rig_probe(&myport);
|
|
/* Set verbosity level - errors only */
|
|
rig_set_debug(RIG_DEBUG_ERR);
|
|
/* Instantiate a rig - your rig */
|
|
/* my_rig = rig_init(RIG_MODEL_TT565); */
|
|
my_rig = rig_init(myrig_model);
|
|
/* Set up serial port, baud rate - serial device + baudrate */
|
|
rig_file = "/dev/ttyUSB0";
|
|
strncpy(my_rig->state.rigport.pathname, rig_file, FILPATHLEN - 1);
|
|
my_rig->state.rigport.parm.serial.rate = 57600;
|
|
my_rig->state.rigport.parm.serial.rate = 9600;
|
|
/* Open my rig */
|
|
retcode = rig_open(my_rig);
|
|
printf("retcode of rig_open = %d \n", retcode);
|
|
/* Give me ID info, e.g., firmware version. */
|
|
info_buf = (char *)rig_get_info(my_rig);
|
|
printf("Rig_info: '%s'\n", info_buf);
|
|
|
|
/* Note: As a general practice, we should check to see if a given
|
|
* function is within the rig's capabilities before calling it, but
|
|
* we are simplifying here. Also, we should check each call's returned
|
|
* status in case of error. (That's an inelegant way to catch an unsupported
|
|
* operation.)
|
|
*/
|
|
|
|
/* Main VFO frequency */
|
|
status = rig_get_freq(my_rig, RIG_VFO_CURR, &freq);
|
|
printf("status of rig_get_freq = %d \n", status);
|
|
printf("VFO freq. = %.1f Hz\n", freq);
|
|
/* Current mode */
|
|
status = rig_get_mode(my_rig, RIG_VFO_CURR, &mode, &width);
|
|
printf("status of rig_get_mode = %d \n", status);
|
|
switch(mode) {
|
|
case RIG_MODE_USB: mm = "USB"; break;
|
|
case RIG_MODE_LSB: mm = "LSB"; break;
|
|
case RIG_MODE_CW: mm = "CW"; break;
|
|
case RIG_MODE_CWR: mm = "CWR"; break;
|
|
case RIG_MODE_AM: mm = "AM"; break;
|
|
case RIG_MODE_FM: mm = "FM"; break;
|
|
case RIG_MODE_WFM: mm = "WFM"; break;
|
|
case RIG_MODE_RTTY:mm = "RTTY"; break;
|
|
default: mm = "unrecognized"; break; /* there are more possibilities! */
|
|
}
|
|
printf("Current mode = 0x%X = %s, width = %d\n", mode, mm, (int) width);
|
|
/* rig power output */
|
|
status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RFPOWER, &power);
|
|
printf("RF Power relative setting = %.3f (0.0 - 1.0)\n", power.f);
|
|
/* Convert power reading to watts */
|
|
status = rig_power2mW(my_rig, &mwpower, power.f, freq, mode);
|
|
printf("RF Power calibrated = %.1f Watts\n", mwpower/1000.);
|
|
/* Raw and calibrated S-meter values */
|
|
status = rig_get_level(my_rig, RIG_VFO_CURR, RIG_LEVEL_RAWSTR, &rawstrength);
|
|
printf("Raw receive strength = %d\n", rawstrength.i);
|
|
isz = my_rig->caps->str_cal.size;
|
|
printf("isz = %d \n", isz);
|
|
s_meter = rig_raw2val(rawstrength.i, &my_rig->caps->str_cal);
|
|
printf("S-meter value = %.2f dB relative to S9\n", s_meter);
|
|
/* now try using RIG_LEVEL_STRENGTH itself */
|
|
status = rig_get_strength(my_rig, RIG_VFO_CURR, &strength);
|
|
printf("status of rig_get_strength = %d \n", status);
|
|
printf("LEVEL_STRENGTH returns %d\n", strength.i);
|
|
return 0;
|
|
}
|